First, put the found fruit basket on the table, and put a layer of plastic film on the bottom.

　　Wear rubber gloves and put a thick layer of cement mortar on the bottom of the fruit basket;

　　Secondly, a layer of cement mortar is coated inside the fruit basket;

　　Cement mortar is wrapped along the edge of the fruit basket, and the whole fruit basket is wrapped with cement mortar to make a cement flowerpot.

　　Note: 6 small holes need to be left at the bottom of the fruit basket. After plastering cement mortar, poke the small holes with a small stick.

　　In this way, the prototype of the flowerpot is basically completed.

　　Next, it is necessary to use cement mortar for heightening and thickening.

　　Holding the four sides of the fruit basket with both hands, heightening it with cement mortar, about 10 cm.

　　Treating the surface of cement flowerpot

　　Before the mud of the cement flowerpot is dry, the four sides of the flowerpot are trimmed directly with a shovel.

　　The side is scratched with a shovel to create a "rock gully" appearance.

　　When the flowerpot is completely dry, use a brush to polish it, keeping the edges and corners of the side.

　　Unclog the original ventilation and drainage holes.

　　Start coloring the flowerpot.

　　Brush the primer once first, from the inside to the outside, and wipe it all evenly.

　　Finally, start painting the top coat, just wipe it with a sponge and wait until it is dry.