1. Prepare wool and knitting needles. Let's do a demonstration, starting with 44 stitches. The actual knitting should be measured and the needle should be started.

　　2

　　/10

　　Distribute three needles, one for upper needle and one for lower needle. Knit to the required height of the collar.

　　three

　　/10

　　Then start the minute hand, which is divided into chest, back and shoulders. Among them, 15 needles on the chest, 15 needles on the back and 7 needles on both shoulders are distributed on 4 needles.

　　four

　　/10

　　Then start knitting, and add a stitch before the second stitch at the beginning and the last stitch of each stitch.

　　five

　　/10

　　After weaving for a certain length, you can see four shoulder stems.

　　six

　　/10

　　So weave until you reach your armpit, and put the wool head on your shoulders.

　　seven

　　/10

　　After distributing the front piece and the back piece with three needles, start knitting the next needle. Weave until the required length.

　　eight

　　/10

　　Then knit one needle on the needle, one needle on the needle, and knit the edge of the sweater.

　　nine

　　/10

　　Next, put the sleeve on the needle and start knitting, and start to collect 2 stitches under the armpit. Then, after collecting the stitches according to your own needs and knitting to the required length, start knitting the sleeve edge, and use one stitch to stitch up and stitch down until all the stitches are required.

　　10

　　/10

　　In the same way, I had to use the other sleeve. So the sweater is knitted.

　　1. Cut out 4 ribbons (30cm long) and fold them in half at 11: 19.

　　2. Thread the four folded ribbons in turn (the long ones are at the bottom) and then tighten them like a "+"shape.

　　3. Fold the four long sides of the "+"shape upward (the long side is upward and the folded side is downward) and tighten it.

　　4. Take the long one and fold it down into a triangle, then fold it up into a triangle. With the above method, fold the other three colored ribbons into two triangles, insert them near the edge of the second triangle, and tighten them so that the two triangles stand in a "+"shape, and connect the other three colored ribbons in sequence.

　　5. Thread the four long ribbons just inserted into a square, and thread the other three ribbons in the same way. Shaped like a "#" shape, just fold out 18 such triangles.

　　6. First, take two # shapes, connect two ribbons on both sides together, then take six # shapes and connect them in turn to form a ring, then press down the middle part of the two # shapes on the upper part of the ring, and press down the symmetrical part on the lower part to form a "peach heart" shape.

　　7. Take two "peach hearts", connect them at symmetrical positions on the upper part, and connect them at corresponding positions.

　　8. Take another "#" and connect it in the center. Turn over the "peach heart". In the same way, connect three "#", and take another two "#" shapes. All 16 sides are connected, which can form a spherical shape. Just make two.

　　9. String the balls and hearts together with a thin thread, and string some pentagons and zongzi made of colored ribbons in the middle of the line (if possible, you can hang some small wind chimes on it, which is very effective).